Common Issues Of Hp Printer

 

The errors that occur in our hardware device are a major concern. One of the important hardware devices is the HP printer which is also subjected to various errors.

Common errors of HP printer

Error->> 02 –Warming up

This problem is linked with the driver and cable problems. This issue can be solved by the removal of printer cable after the printer is turned off after that you have to turn it on. The driver should be updated if the printer is ready and if not then change the printer cable.

Error->> 10 –Gives the memory error

The problem is due to the toner of the cartridge chip of the printer that is not able to read the content. The e-label is displayed on the cartridge of the printer. To solve this issue you to reset the printer by making it on and off. If this doesn’t work then detach and reinstall the cartridge.

Error->> 11 –Paper out

If the paper of the printer is out and is not settled properly then it might the problem of the sensor and tray of the machine. To resolve this issue you have to make sure that the surface of the paper tray should be flat. You should clean the build of the toner and damage of the tray should be checked. If this doesn’t work then the Opto-sensor and the paper sensor should be checked.

Error->> 12 –NO EP or Open

If the installation of the toner cartridges is not correct which indicates that either the cover is open or the cooling fans are defective. To resolve this issue you have to check that the toner should be installed properly and should be covered.

Error->> 13 – Paper jam

The jamming of the paper occurs due to four stages like a pickup, printing, fusing, and exit. The indication of jam is shown in the modern HP printer. To resolve this issue, you should also check the screen and paper guide. The harsh implementations should not be attempted to remove the jammed paper as this will cause damages to your printer.

Error->> 16 – Low toner

This problem arises due to the cartridge of the toner is empty or the distribution of toner is not evenly spread. To resolve this issue you should remove the cartridge of the toner and shake it and replaced it.

Error->> 20 – Memory overflow

The capacity of the memory of the printer will be exhausted. For the resolution of this problem, the DPI should be reduced, and the collate option should be unpicked in the printer’s driver. If this problem can’t be solved then use additional memory.

Errors->> 21 – Print overrun

This error occurs due to exceeding the limit of the memory capacity of the printer. To resolve this issue you have to reduce the size of the job for printing. The DPI can also be reduced and you have to unstick the collate option inside the driver of the printer or can install the additional memory.

Errors->> 22 – I/O Configuration

Sometimes the communication issue arises between the computer and the printer. To resolve this issue you have to try with different cables and the cable should be properly inserted inside the printer and connected to computers or laptops.

Conclusion

For the removal of these errors, you can perform different troubleshooting tasks but if you fail to do so then you can take the help of HP Printer Tech Support Toll-free Phone Number +1-800-903-5832  any time and gets the best solution for your printer. So why are you still resting? Just call the best technicians and get assistance. HP Printer Tech Support will love to serve you.

 Visit at https://www.hpprinternumber.com/